Inspection work produces findings, and a finding is only useful if it lands somewhere with an asset reference attached. What follows is the chain from capture to work order.
Thermal capture conditions matter as much as the sensor: time of day, load, and emissivity assumptions. These pages state what the method can support and where confirmation by a separate inspection step is still required.
10 topics
Energy and Facility Inspection
Thermal anomaly screening and surface defect records across PV arrays, transmission assets, turbines, substations and pipelines, linked back to the asset register.
Topics in Energy and Facility Inspection
Topics are published on a rolling basis. Nothing goes live before its specifications and sources have been verified.
- Assisted Detection of Solar PV Thermal AnomaliesPublished
- Screening Visual Anomalies on Transmission AssetsPublished
- Surface Defect Screening on Wind Turbine BladesPublished
- Thermal Anomaly Patrol for Substation FacilitiesPublished
- Change Detection along Pipeline CorridorsPublished
- Recording Storage Tank Appearance AnomaliesPublished
- Assisted Bridge Surface Defect InspectionPublished
- Roof and Building Surface InspectionPublished
- Linking Asset Registers to ImageryPublished
- Defect Review Work Orders and Report LoopPublished